Screwing The Robacta Reamer V Easy Han6P J To The Underlying Surface; Screwing The Adjusted Cleaning Device And Installation Stand To The Underlying Surface - Fronius Robacta Reamer V Easy Operating Instructions/Spare Parts List

Screwing the Robacta Reamer V Easy Han6P J to the
underlying surface
Screwing the ad-
justed cleaning
device and instal-
Different fixings may be required to set up the installation stand depending on the
lation stand to the
type of underlying surface (foundation).
underlying sur-
Fixings are therefore not included in the scope of supply of the installation stand. The in-
face
staller is responsible for selecting the right type of fixing.
1
2
Use the fixings supplied with the mounting plate to fasten the mounting plate to the
installation stand.
2
3
4
5
44
NOTE!
Place the optional installation stand on a level, firm and vibration-free surface (foun-
dation)
- Position the installation stand in such a way that the distance the robot has to trav-
el to the cleaning device on the installation stand is as short as possible
Screw the installation stand to the underlying surface (foundation) using the appropri-
ate fixings
NOTE!
3
4
5
6