IMPORTANT! The settings in the Setup menu will be lost when the PlasmaModule is
reset. The parameter settings in the second level of the Setup menu (2nd) are not dele-
ted.
Setup menu level
2 (2nd)
Parameters for machine pre-sets
C-C
Flow monitoring
Unit
Setting range
Factory setting
"ON" position - flow monitoring is on all the time
"OFF" position - flow monitoring is always off
2nd
Second level of the Setup menu
+ +
1
/
2
+ +
3
4
5
6
-
ON / OFF
ON
Access the Setup menu: by pressing the Store button and
the Start / Stop button simultaneously
The plasma process parameter last called is displayed.
Select "2nd" parameter by pressing the Start / Stop button
To enter the Setup menu level 2, press the Store button
and the Start/Stop button simultaneously
The machine pre-set parameter last called is displayed.
Select parameters by pressing the Start / Stop button
Change the parameter values by using the adjusting dial
To exit Setup menu level 2:
press the Store button twice
-
press once = return to Setup menu, "2nd" parameter
-
press twice = return to normal mode
81