Applications; Warning Notices On The Cleaning Device - Fronius Robacta Reamer V Easy Operating Instructions/Spare Parts List

The gas nozzle clamping device is adjusted for gas nozzles with an outer diameter
of 25 mm (0.
98 inch). If gas nozzles with a different outer diameter are used, the gas nozzle clamping
device must be adjusted before using it for the first time and each time a device is replaced,
as appropriate to the gas nozzle.
-
Components required for installing the Robacta Reamer V Easy Han6P J:
-
-
Components required for installing the Robacta Reamer V Easy Han6P J together
with the adjusted wire cutter:
-
-
-
-
The options available for the cleaning device are shown on the following pages.

Applications

The cleaning devices are exclusively intended for use in robot and other automated appli-
cations, and can be used for a wide range of materials.
The main application areas are:
-
-
-
-
-
Warning notices The cleaning device is fitted with warning notices and a rating plate. The warning notices
on the cleaning and rating plate must not be removed or painted over.
device
The locations of the warning notices are shown on the Robacta Reamer V as an example.
The warning notices are all in the same place on the Robacta Reamer V Easy, Robacta
Reamer V Easy Han6P and Robacta Reamer V Easy Han6P J.
18
NOTE!
The same system in connection with the cleaning device is also available for the wire
cutter
Robacta Reamer V Easy Han6P J
Mounting plate for the Robacta Reamer V Easy Han6P J
Robacta Reamer V Easy Han6P J
Mounting plate for the Robacta Reamer V Easy Han6P J
Adjusted wire cutter
Mounting plates for the wire cutter
Automobile and component supply industry
Equipment construction
Chemical plant construction
Machine and tracked vehicle manufacturing
Construction machinery and special vehicles