Fitting The Cleaning Cutter; General - Fronius Robacta Reamer V Easy Operating Instructions/Spare Parts List

Fitting the cleaning cutter

General

The cleaning cutter is fitted in the same way for all Robacta Reamer V cleaning de-
vices.
Fitting the clean-
ing cutter
A cleaning cutter that has become very hot through use can cause severe burns.
Before handling cleaning cutters, allow cleaning cutter to cool to room temperature (+25°C,
+77 °F).
Only use the device manufacturer's contact tips, gas nozzles and cleaning cutters.
If other manufacturers' products are used, trouble-free operation of the device cannot be
guaranteed. The manufacturer accepts no liability for damage resulting from the use of oth-
er manufacturers' contact tips, gas nozzles or cleaning cutters.
The cleaning cutter is not part of the scope of supply.
Consult the manufacturer's spare parts list for the appropriate cleaning cutter.
1
7
2
3
48
NOTE!
CAUTION!
NOTE!
NOTE!
Remove the protective covering from the cleaning device
1
Fit the protective covering to the cleaning device in its original position
2