Robacta Reamer V Easy Han6P J Scope Of Supply, Options And Required Components; Robacta Reamer V Easy Han6P J Scope Of Supply; Robacta Reamer V Easy Han6P J Required Components; Robacta Reamer V Easy Han6P J Options - Fronius Robacta Reamer V Easy Operating Instructions/Spare Parts List

Robacta Reamer V Easy Han6P J scope of supply,

options and required components
Robacta Reamer
V Easy Han6P J
scope of supply
not shown:
(6)
(7)
(8)
Robacta Reamer
V Easy Han6P J
required compo-
nents
Robacta Reamer The following options are available for the cleaning device:
V Easy Han6P J -
options -
-
-
Harting Han6P connecting plug (X1) without cable
Operating instructions
Fixings for assembling the cleaning device:
- 4 screws
Installation stand
Fill-level control sensor
Adjusted wire cutter
Mounting plates for the wire cutter including fixings
NOTE!
(1)
The "Robacta Reamer" parting agent
(item number 42,0411,8042) and the cle-
aning cutter are not part of the scope of
supply.
(1) Robacta Reamer V Easy Han6P J
cleaning device
(2)
(2) Spatter tray retainer
(3) Spatter tray
(3)
(4)
(4) Tightening key for cleaning motor
(5)
(5) Compressed air relief valve
NOTE!
The mounting plate and fixings are not
part of the scope of supply for the clea-
ning device, but are needed to ensure
that the cleaning device is adjusted
when it is installed.
23