Manually Checking Robacta Reamer V Functions; General - Fronius Robacta Reamer V Easy Operating Instructions/Spare Parts List

Manually checking Robacta Reamer V functions

General

NOTE!
Before starting the automatic cleaning process, the functions of the cleaning device
must be checked manually.
NOTE!
To ensure that the functions are checked properly, the welding torch must be in the
cleaning position.
Manually check-
NOTE!
ing Robacta
Reamer V func-
When the slot for the "Lifting device up/down", "Spray in parting agent" and "Clamp
tions
gas nozzle/Cleaning motor on" screws is positioned horizontally, function is deac-
tivated.
1
2
The following must be checked when the functions are being performed:
-
-
1
3
Clamp gas nozzle/cleaning motor on
The following must be checked when the function is being performed:
-
Disconnect the cleaning device from the robot control
Establish a compressed air supply to the cleaning device
operation of the gas nozzle clamping device
function of cleaning motor
how far the cleaning cutter is inserted into the gas nozzle
2
4
2
1
0
1
Deactivating the functions
1
69