Fitting The Cleaning Cutter On The Robacta Reamer Alu 3000Upm; Fitting The Cleaning Cutter - Fronius Robacta Reamer Alu Edition Manual

Fitting the cleaning cutter on the Robacta Reamer
Alu 3000upm
Fitting the clean-
ing cutter
A cleaning cutter that has become very hot through use can cause severe burns.
Before handling cleaning cutters, allow cleaning cutter to cool to room temperature (+25°C,
+77 °F).
NOTE!
Only use the device manufacturer's contact tips, gas nozzles and cleaning cutters.
If other manufacturers' products are used, trouble-free operation of the device cannot be
guaranteed. The manufacturer accepts no liability for damage resulting from the use of oth-
er manufacturers' contact tips, gas nozzles or cleaning cutters.
NOTE!
The cleaning cutter and adapter are not included in the scope of supply.
Consult the device manufacturer's spare parts list for the appropriate cleaning cutter and
adapter.
1
3
2
3
CAUTION!
Remove the protective covering from the cleaning device
Fit the protective covering to the cleaning device in its original position
43