Fitting The Welding Torch; Fit The Welding Torch - Fronius KD 4000 D-11 Operating Instructions Manual

Fitting the welding torch

Fit the welding
torch
(3)
(2)
Welding torch and torch control connections
1
2
3
4
(4)
5
6
(1) (6) (5)
Switch the power source mains
switch to the "Off" position
Connect welding torch control
plug to the LocalNet port (3) or
torch control connection (4) and
fasten
If present: connect colour-coded
external water connections for wa-
ter flow (5) and return (6)
Plug welding potential bayonet
plug into current socket (1) and
turn to fasten it
Insert the wire feeder, infeed tube
first, into the wirefeeder connec-
tion (2)
Tighten the union nut by hand to
fix in place
23