Mounting Implement - Zetor UTILIX HT 45 Operator's Manual

Mounting Implement

If the PTO is used, remove the safety cover off the PTO shaft.
Adjust the yoke rod on the lower links to suit the implement in use.
Attach the left lower link, then attach the right lower link using the adjusting handle on the leveling box if
required.
Attach the top link.
Attach the PTO shaft to the tractor if used, making sure that it is locked in place.
Adjust the check chains to suit the implement and tighten the locknuts.
To remove an implement reverses the procedure.
1 - PTO shield cover
Caution:
When traveling on public or farm roads connect both brake pedals and allow for the weight of any
mounted implement to ensure that the unit is not unbalanced.
Also allow for the width when passing other road users. Where fitted use the hazard lights provided.
Strictly follow the local traffic regulations.
Caution: Do not attach a PTO shaft with the engine running and ensure all safety shields are in
place.
Caution: When operating near others with an
implement attached take particular care to allow for
the width of the implement and avoid accidents.
CONTROLS, INSTRUMENTS & OPERATIONS
66
U18N055A
U18N055B