Cruise Control Button; Cruise Speed Control Switch; Load Sensing Button - Zetor UTILIX HT 45 Operator's Manual

Cruise control button

Engaging Cruise Control
- Depress the forward speed control pedal until the
required speed is achieved.
- Press the cruise control button to engage cruise
control.
- Release the forward speed control pedal.
- The cruise control is only operational when the
machine is traveling forward.
Disengaging Cruise Control
To disengage the cruise control you can either
press the cruise control button or depress the brake
pedal.

Cruise speed control switch

Cruise speed can be increased or decreased while cruise
control is engaged.
Press and release top of cruise speed control switch (+) to
increase cruise speed by increment ratio. Press and
release again to increase cruise speed more by increment
ratio.
Press and release bottom of cruise speed control switch (-
) to increase by increment ratio. Press and release again
to decrease cruise speed more by increment ratio.
Adjusted setting is erased when cruise control is
disengaged.

Load sensing button

Load sensing function is used to prevent engine from
stalling during heavy load application.
Press load sensing button to activate load sensing
function.
If the engine speed drops more than the set range, the
controller reduce HST speed to help the engine to
recover. The heavier load on the engine, the tractor speed
is more and more reduced.
Press again the switch off the load sensing function.
CONTROLS, INSTRUMENTS & OPERATIONS
45
U18N020
U18N021
U18N022