Table of Contents
Advertisement
Battery charging
- A boost charge is only for emergencies. It will partially
charge the battery at a high rate and in a short time.
- When using a boost-charged battery, It is necessary to
recharge the battery as early as possible.
Failure to do this will shorten the battery's service life.
Caution:
Always disconnect the negative terminal first when removing the battery and always connect the
positive terminal first when fitting the battery.
When connecting the battery leads make sure not to reverse the polarity.
Quick charging will reduce battery life.
Disconnect the terminals prior to charging the battery to avoid damage to the circuit and electrical
instruments.
Battery Disconnect
The function of the battery disconnect switch is to disconnect the power supply to the electrical
system by interrupting the connection to the battery. This has benefits for tractor safety and
operation, in particaular:
1. Protects the electrical system against short circuit;
2. Reduced battery self-discharge when the tractor left idle for prolonged periods;
3. Allows maintenance and repairs to be carried out in conditions of safety.
1 - Disconnect knob
Turn the knob to ''OFF'' to disconnect the battery and back
to ''ON'' to resume normal operation. The battery
disconnect knob 1 is located on a bracket to the right of
the battery. Putting the battery disconnect in safety
condition The battery disconnect knob may be removed
for safety purposes in the manner described below.
LUBRICATION & MAINTENANCE
91
U18N095
U18N095A
Advertisement
Table of Contents
