Table of Contents
Advertisement
Remote hydraulic control valve coupler connecting and disconnecting
Connecting
1. Clean both couplers.
2. Remove dust plugs.
3. Insert the implement coupler to the tractor hydraulic
coupler.
4. Pull the implement coupler slightly to make sure
couplers are firmly connected.
Disconnecting
1. Lower the implement first to the ground to release hydraulic pressure in the hoses.
2. Clean the couplers.
3. Relieve pressure by moving hydraulic control levers with engine shut off. Pull the hose straight from
the hydraulic coupler to release it.
4. Clean oil and dust from the coupler, then replace the dust plugs.
Joy stick lever
This simple joystick lever can control the use of a front-
end loader.
And lift-retract, dump-rollback smoothly and act as one
handle lever.
To raise the front end loader: pull the lever to lift position.
To lower the front end loader: push the lever to retract
position.
To rollback the bucket: pull the stick to rollback position.
To dump the bucket: push the stick to dump position.
1 - To float the Boom.
2 - To lower the Boon Front end loader.
3 - To rollback the bucket.
4 - To dump the bucket.
5 - To quick dump the bucket.
6 - To raise the Boon of Front end loader.
NOTE: The Joystick control and valve can also be used for other applications if a front end loader is not
fitted.
CONTROLS, INSTRUMENTS & OPERATIONS
54
U18N037
U18N038
U18N039
Advertisement
Table of Contents
