Gap Adjustment; Adjusting The Brake; Adjusting Method; Adjusting The Throttle Lever - Zetor UTILIX HT 45 Operator's Manual

Gap adjustment

Adjusting the brake

1 - Free play
Using the brake over a period of time will increase the free
play.
The correct free play of the pedal is 0.78~1.18 in To
adjust, loosen the locknut on the turnbuckle and adjust.
Check the adjustment and tighten the locknut if the free
play is correct.

Adjusting method

Loosen the locknuts to adjust the brake.
Turning counterclockwise to increases the free play, or
turning clockwise to decreases.
Tighten the locknut and confirm to fix the Nuts.
Check that the free play is correct and the same on both
pedals to ensure even braking.
Caution: Uneven adjustment of the left and right pedal will result in one sided braking when
the pedals are connected and can cause serious accidents, especially at high speeds.
Double check to ensure free play is the same on both pedals.

Adjusting the throttle lever

If this lever is either loose or difficult to move please consult your dealer for rectification of the problem.

Adjusting toe-in

If the toe-in adjustment is incorrect it can cause severe shaking of both the steering wheel and the entire
tractor.
The correct toe in is 0.08~0.24in. We recommend that this adjustment is made by the dealer.
LUBRICATION & MAINTENANCE
89
U18N091
U18N092