Working Lamps (Front And Rear); Rearview Mirrors; Cab Ceiling; How To Controls Cabin - Zetor UTILIX HT 45 Operator's Manual

Hide thumbs Also See for UTILIX HT 45:
Table of Contents

Advertisement

Working lamps (front and rear)

The working lamps are located on the cab roof (two in the front and two in the rear) .They are switched on by
means of the special switches on the roof console.
1 - Working Lamp
1 - Air Filter
2 - Working Lamp (Rear)
3 - Air Filter
4 - Door Handle

Rearview mirrors

The cab is provided with rearview mirrors on both sides. They can be adjusted and folded, whenever
necessary, to avoid interference with external obstacles.
The mirror have a telescopic arm to allow positioning for maximum convenience by the user.
Remember that mirrors must always be positioned in compliance with road traffic regulations when driving on
a public highway.

Cab ceiling

The ceiling is padded with insulation material to block heat radiation into the cab and keep the temperature
down when working in very sunny areas.
The cab platform is covered with a ''firm grip'' carpet in the most commonly used areas.
It is recommended to keep this carpet clear of earth, mud, etc. so that the operator may get on and off the
tractor in full safety.

How to Controls Cabin

1 - Sun Roof
2 - Recirculation inlet
3 - Radio & CD player
4 - Pivotable diffuser
5 - Interior Lamp
6 - Air conditioner Heater control
CABIN
103
U18N110
U18N111
U18N112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Utilix ht 55

Table of Contents