Safe Operation Of Your Tractor; Safety Tips During Maintenance - Zetor UTILIX HT 45 Operator's Manual

Hide thumbs Also See for UTILIX HT 45:
Table of Contents

Advertisement

Safe operation of your tractor

The manufacturer of your tractor has made every effort to make it as safe as is humanly possible.
Beyond this point it is the responsibility of the operator to avoid accidents and we ask that you read and
implement our suggestions for your safety.
Ensure that only trained and competent operators use this tractor and ensure that they are fully
conversant with the machine and aware of all it's control and safety features.
Operators should not operate the tractor or associated machinery while tired or untrained.
To avoid accidents please ensure that the operator wears clothing which will not get entangled in the moving
parts of the tractor or machine and protect him or her from the elements.
When spraying or using chemicals, please ensure that clothing and protective equipment is worn which
prevents respiratory or skin problems.
For full details consult the manufacturer of the chemicals.
To avoid lengthy exposure to noise ensure that ear protection is worn.
If adjustment to the tractor or machinery need to be made ensure the tractor or machine are turned off
beforehand.
Use of certified Roll Over Protection Structure (ROPS) is a must while operating a tractor.
Use of seat belt is a must while operating a tractor.
In summary, ensure at all times that the safety of the operator and any other worker is paramount.

Safety tips during maintenance

1. At least on a daily basis check all oil levels. Water level in the radiator and electrolyte level in the
battery and perform services according to the service schedule.
2. Ensure tire pressure are even and the correct pressure for the job being done is maintained.
3. Check to ensure that the all controls and preventative mechanisms of the Tractor and implement work
correctly and effectively.
4. Ensure that an adequate set of the correct tools is available for maintenance and minor repairs.
5. Ensure that all service work and repairs are carried out on a flat area with a concrete or similar floor.
Do not carry out service work on a tractor until it is switched off, and the parking brake applied and
wheels choked. Where a tractor is started in a confined area, ensure that the area is well ventilated as
exhaust gases are very harmful, and can cause death.
6. Do not work under raised implements.
7. When changing wheels or tires ensure that a suitable wheel stand is placed under the axle prior to
removing the wheel and the wheels are chocked.
8. Where guards or shields need to be removed to perform a service or repair, ensure that the guard or
shield is correctly reinstalled before starting the Tractor.
9. Never refuel near an open flame or with an overheated engine. Ensure to turn off Engine before
refueling.
10. The cooling system operates under pressure, take care when removing the Radiator cap on a hot
engine to prevent being scalded by steam or hot water. Do not add water in the radiator when the
engine is hot. Add water to the radiator only after the engine cools down completely.
11. To prevent fires keep the tractor including the engine clean and free from inflammable material and
well away from fuels and other inflammable material.
SAFETY INSTRUCTIONS, DO'S & DON'TS
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Utilix ht 55

Table of Contents