Lowering speed control knob for the 3 point hitch
1 - Adjusting Knob of Hydraulic decent Speed
This knob controls the downward speed of the hydraulics
three point linkage and positioned at the front of the
driver's seat.
To slow the downward speed - Turn the knob clockwise.
To increase the downward speed, turn the knob
anticlockwise.
To lock the knob clockwise.
Do not over tighten the knob.
Caution: Always set the knob to lock when
1. Traveling on the road
2. Replacing tires or blades on an implement.
3. Making adjustments to an implement. Sudden dropping of an implement due to hydraulic
problems can cause serious injury or death.
Remote hydraulic valve lever
Move the lever up or down and hold. This will raise or
lower the implement (rotavator or hydraulic plow). Remote
control valve is detent type (double-acting with Detent).
Important:
Do not hold the lever in the ''pull'' or ''Push'' position once the remote cylinder has reached the end of the
stroke. As this will cause oil to flow through the relief valve. Forcing oil through the relief valve for extended
periods will overheat the oil.
When using the tractor hydraulic system to power front loader, do not operate the boom and bucket cylinders
simultaneously.
CONTROLS, INSTRUMENTS & OPERATIONS
53
U18N035
U18N036