Changing The Oils In The Tractor; Changing Engine Oil - Zetor UTILIX HT 45 Operator's Manual

LUBRICATION & MAINTENANCE

Changing the oils in the tractor

Always use quality oils as engine or transmission oil (refer to the chapter: Recommended transmission oil)
Refer to the tables 'Periodical check and service table' for the change frequency.

Changing engine oil

1 - Engine Oil filter
Park tractor on level surface, shut-off engine.
Remove sump plug & drain oil.
Replace and check the sump plug and refill the engine
with oil.
to the correct level on the dipstick (approx. 1.85 gal).
The grade of oil to be used will depend on the ambient
temperature.
The tractor is shipped from the factory with 15W/40.
For summer use over 77 °F use SAE 30.
For temperatures from 32 °F - 77 °F use SAE20 or
15W/40.
U18N074
For temperatures below 32 °F use SAE 10W.
Important:
When changing the oil always change the filter.
Always use the same oil, as using different oils or specifications can cause damage.
Dispose off the old oil as per local regulations.
81