Adjustment Of The Lift Link On The Lower Link; Mounting Implement - Zetor UTILIX HT Series Operator's Manual

Adjustment of the lift link on the lower link

1 - Lifting Arm
2 - Lower Link
3 - Holes for Stabilizer Bar
4 - Extendable Type of Lower Link
5 - Position Holes of the Vertical Link
6 - Vertical link
For various applications, the lifting height of the lower links
can be adjusted by adjusting the pins in the holes of the
vertical links.

Mounting implement

1 - Length Control Handle of the Stabilizer Bar
2 - Connection Pin of the Stabilizer Bar and the Lower
Link
3 - PTO
Adjust the appropriate length using the side links so that
the setting is suitable for the implement being used and
secure it with the lock nut.
If the PTO is used, attach it to the tractor and make sure it
is locked in its position.
Use the reverse procedure to remove the implement.
Caution:
When driving on public or agricultural roads, connect the two brake pedals and ensure that the
weight of all the aggregated implements is distributed and the unit remains balanced.
At the same time, monitor the width of the vehicle to avoid endangering other road users. If the
tractor is equipped with warning lights or beacons, use them.
Strictly observe local traffic rules.
CONTROLS, INSTRUMENTS & OPERATIONS
U18N046
U18N047
69