Compressor belt adjustment
Check the compressor belt tension regularly and adjust If required.
The correct tension is if the center of the belt is pushed With a finger it moves in approx. 10 mm (0.39 in) as
shown in the picture.
To adjust the belt, loosen or tighten the nut as shown in the picture.
1 - Tension Adjusting Bolt
Air conditioning system
The system is designed to ensure optimum temperature inside the cab and maximum comfort and safety for
the operator.
However, it is advisable to consult our specialized workshops whenever repairs or adjustments need to be
performed.
Do not approach the system with open flames, as any escape from the circuit may produce a lethal gas.
1 - Alternator
2 - Compressor
3 - Speed fan
4 - Electric resistance
5 - Evaporator
6 - Air filter
7 - Recirculation inlets
8 - Pivotal air diffusers
Roof hatch (if equipped)
1 - Roof hatch
Ventilation -push the latch towards the front of the tractor
and then push the hatch up.
Emergency Exit-Push firmly upwards to release the
support struts from the lower retainer clips.
CABIN
107
U18N120
U18N121
U18N122