Throttle Lever (Hand Throttle); Speed Control Pedal; Brake Pedal; Parking Brake Lever - Zetor UTILIX HT 45 Operator's Manual

Throttle Lever (Hand Throttle)

Pulling the hand throttle towards the driver increase
engine speed.
Pushing it away from the driver decreases engine speed.

Speed control pedal

The Speed Control Pedal is located in RHS of the
Operator floor.
Depress the forward speed control pedal to move forward.
Depress the reverse speed control pedal to move
backward.
The speed control pedal will return in neutral position and
the tractor will stop when the speed control pedal is
released.

Brake pedal

Right and left brake pedals are provided to assist in turning the tractor in the field.
Caution: A connecting latch is provided to connect the right and left brake pedals for high
speed or road use. In the interest of safety always use it on the road or at high speed as using one
side only can cause rollovers. When servicing the tractor ensure that the adjustment on both sides in
the same.

Parking brake lever

1 - Parking brake lever
Connect the brake pedals, push them down while pulling
the park brake lever up to engage.
Push the Brake pedal to release.
Important: Traveling with the parking brake on will damage the brakes.
CONTROLS, INSTRUMENTS & OPERATIONS
48
U18N026
U18N027
U18N028