Hour Meter; Tachometer; Fuel Gauge And Water Temperature Gauge; Hazard Warning Signal Switch - Zetor UTILIX HT 45 Operator's Manual

Hide thumbs Also See for UTILIX HT 45:
Table of Contents

Advertisement

Hour meter

The hour meter consists of digits with the last digit
th
indicating 1/10
of an hour. It shows hours the tractor has
been used.
The lamp at bottom of hour meter should twinkle during
Operation.

Tachometer

This meter shows the revolutions of the engine and the
PTO shafts as well as the travel speed in top gear.

Fuel gauge and water temperature gauge

Fuel gauge
Shows the amount of fuel in the tank when the ignition
switch is ON.
Water temperature gauge
Shows the water temperature with the ignition switch ON.
C is low to normal temperature.
H is high temperature.
If the pointer is in the red H segment the engine is
overheating.
Refer this book to rectify the problem.

Hazard warning signal switch

Push the hazard warning signal once to operate the
hazard warning light. (Left and right turn indicators flash).
Push the hazard warning light switch again to switch off
the hazard warning lights.
1 - Hazard Warning Signal S/W
CONTROLS, INSTRUMENTS & OPERATIONS
41
U18N013
U18N014
U18N015
U18N016

Advertisement

Table of Contents
loading

This manual is also suitable for:

Utilix ht 55

Table of Contents