Mounting Implement; Loader Valve And Joystick Lever - Zetor COMPAX CL Series Operator's Manual

Mounting Implement

If the PTO is used, remove the safety cover from the PTO
shaft.
Adjust the three-point hitch to allow trouble-free
attachment of the implement.
1. PTO Cover
Connect the PTO shaft to the tractor and make sure it is secure.
Adjust the three-point hitch and secure the set positions. To disconnect the implement, proceed in the
reverse order.
Caution: Do not attach a PTO shaft with the engine running and ensure all safety shields are in
place.

Loader valve and joystick lever

The loader valve is mounted under the step on the right
side.
The joystick lever is mounted on the right side of the cab.
When connecting the loader hydraulics, follow the instructions on the label attached to the
joystick lever or loader assembly instructions.
Incorrect loader operation can lead to an accident.
56
TRACTOR CONTROLS
CCL3540026.gif
U18N055A
CCL3540027