Attaching / Removing The Support To / From The Universal Bracket; Placing / Removing The Device On / From Support (Accessory) - Atmos C 051 Thorax Operating Instructions Manual

7.3.3

Attaching / removing the support to / from the universal bracket

7.4

Placing / removing the device on / from support (accessory)

38
 Firmly hold the support during the entire process.
1. Attach the universal bracket (Chapter „7.1 Attaching
the universal bracket (Accessories)" on page 35).
2. Place the support on the universal bracket by
positioning the thread on the bottom of the support
over the fixing screw of the universal bracket
3. Turn the fixing screw on the universal bracket in a
clockwise direction in order to mount the support to it.
 The support with the device must always be affixed in
a horizontal position.
4. To remove the support loosen the fixing screw on the
universal bracket by turning it counter-clockwise.
1. Place the device on the support.
 Make sure that the guides of the carrying handles or
the lateral strap holders are inserted into the guides
on the bracket.
2. Remove the device from the support by the carrying
handle or on the canister recess.