Attaching/Removing The Device To/From The Universal Bracket - Atmos C 051 Thorax Operating Instructions Manual

7.2

Attaching/removing the device to/from the universal bracket

36
2. Turn the holder clamp until the fixing pin clicks into
place at the next fixing.
Ensure that the fixing pin is correctly clicked into
place before attaching the thoracic drainage unit on the
universal bracket.
Attachment of the universal bracket:
1. Turn the turning knob of the universal bracket
counter-clockwise until the clamp can be attached to
the desired fixture.
2. Turn the turning knob clockwise to fix the universal
bracket.
Ensure that the universal bracket is firmly attached to
the desired fixture.
Firmly hold the ATMOS® C 051 Thorax during the whole
process.
1. Place the device on the universal bracket. Ensure that
the thread at the bottom of the thoracic drainage unit is
directly above the fixing screw of the universal bracket.
2. Turn the fixing screw counter-clockwise to fix the device.
To remove the ATMOS® C 051 Thorax release the fixing screw
by turning counter-clockwise.
The thoracic drainage unit must always be attached
horizontally.