Attaching/Removing The Atmos ® C 051 Thorax To/From The Universal Bracket; Connecting Of Shoulder Belt - Atmos Thorax C 051 Operating Instructions Manual

7.2 Attaching/removing the ATMOS
universal bracket
7.3 Connection of shoulder belt
7.3.1 Strap holder
C 051 Thorax to/from the
®
Attention! Firmly hold the vacuum unit during the whole process.
!
Place the ATMOS C 051 Thorax onto the universal bracket.
®

Ensure that the thread at the bottom of the vacuum unit is
positioned directly above the fi xing screw of the stand holder.
Turn the fi xing screw clockwise to fi x the ATMOS

To remove the ATMOS
anticlockwise.
The thoracic drainage unit must always be attached horizontally.
The strap holders on the back of the device are already mounted on

delivery.
If you do not require the strap holders they can be easily removed with

a standard screwdriver.
C 051 Thorax release the fi xing screw by turning
®
C 051 Thorax.
®
33