Attaching/Removing The Atmos C 051 Thorax To/From The Universal Bracket; Connecting Of Shoulder Belt - Atmos C 051 Thorax Operating Instructions Manual

7.2 Attaching/removing the ATMOS
universal bracket
7.3 Connection of shoulder belt
7.3.1 Connection of the strap holders
C 051 Thorax to/from the
®
Attention! Firmly hold the vacuum unit during the whole process.
!
Place the ATMOS C 051 Thorax onto the universal bracket.
®

Ensure that the thread at the bottom of the vacuum unit is
positioned directly above the fi xing screw of the stand holder.
 Turn the fi xing screw clockwise to fi x the ATMOS
To remove the ATMOS
anti clockwise.
The thoracic drainage unit must always be attached horizontally.
Place the attachment on the backside of the device loops

to the designated raisings.
Please note, that the arrows point upwards.
To fi x the strap holders pull them outwards.

C 051 Thorax release the fi xing screw by turning
®
C 051 Thorax.
®
31