Attaching/Removing The Vacuum Unit At/From The Universal Bracket - Atmos S 042 NPWT Operating Instructions Manual

Attaching the holder clamp
Ensure that the stand holder is firmly attached to the desired fixture.
3.3.6

Attaching/removing the vacuum unit at/from the universal bracket

Firmly hold the vacuum unit during the whole process.
Removal of the vacuum unit is performed in reversed order.
• Turn the turning knob of the holder clamp counter-clock-
wise until the clamp can be attached to the desired fixture.
• Turn the turning knob clockwise to fix the holder clamp.
• Place the vacuum unit onto the stand holder. Ensure that
the thread at the bottom of the vacuum unit is directly
above the fixing screw of the stand holder.
• Turn the fixing screw counter-clockwise to fix the vacuum
unit.
17