Display Symbols; Switching On; Leakage Test - Atmos C 051 Thorax Operating Instructions Manual

4.2.2

Display symbols

Figure
4.3

Switching on

4.4

Leakage test

The leakage test checks the entire tightness of the system. The function of the leakage test is
active at factory settings. The leakage test can be deactivated (Chapter „4.9 User settings" on
page 29).
Generally the leakage test is recommended for checking the leak tightness prior to each
application.
22
Battery status display / charging indicator
Key lock activated
Therapy recording in progress
Therapy on hold
Therapy in progress
Upcoming warning suppressed
Annual inspection is required
1. To switch on the ATMOS® C 051 Thorax please touch the
sensor above of the
2. The ATMOS logo appears with the software version number
in the bottom right corner.
3. After a short time, depending on the user settings the
leakage test starts automatically (Chapter „4.4 Leakage
test" on page 22).
4. Subsequently "Therapy progress" will appear in the display.
V1.3.21
By pressing the buttons you can start a new therapy
recording or continue recording.
5. The main display appears.
6. The device is now ready for use.
Function
symbol for 2 seconds.