Inserting And Removing The Power Supply Unit And Cable; Charging The Device With Power Supply Unit Support (Accessory); Attaching And Removing The Carrying Handle, Disposable Strap And Carrying Strap; Strap Holder - Atmos C 051 Thorax Operating Instructions Manual

7.6

Inserting and removing the power supply unit and cable

7.7

Charging the device with power supply unit support (accessory)

7.8 Attaching and removing the carrying handle, disposable strap
and carrying strap
7.8.1

Strap holder

• The strap holders on the back of the device are already mounted on delivery.
• If you do not require the strap holders they can be easily removed with a standard screwdriver
(TORX - screwdriver T10).
40
1. Insert the power supply unit and charging cable in the
power supply unit support.
2. Remove the power supply unit and the charging cable
from the power supply unit support.
3. The device can be placed or removed from the support
(see chapter „7.4 Placing / removing the device on /
from support (accessory)" on page 38).
1. Insert the charging plug from the power cable through
the recess provided on the support into the charging
socket on the device (see chapter „3.3.1 Battery
charging" on page 14).
 Remove the charging plug from the device before you
remove the device from the support.
Strap holders

1
Strap holder clips

2