Medi-Vac Canister System / Universal Bracket - Atmos 318.0000.0 Operating Instructions Manual

3. Connect the vacuum hose with the connection angle.
3.5.3 Medi-Vac
Removal
1. Remove the connection angle.
2. Push the support of the canister system backwards up to the middle and take it out
of the guides.
Mounting
1. Attach the support of the canister system in the middle on the right side of the
device. The bars at the support must be fitted to the two guides at the device.
2. Slide the support of the canister system forward until it is flush with the device. The
inlet to the pump must be visible.
26 Setting up and starting up
canister system / Universal bracket
®