Avoiding Damage To The Device - Atmos Varioair 3 Operating Instructions Manual

Hide thumbs Also See for Varioair 3:
Table of Contents

Advertisement

Electric shock due to unsuitable mains connection, incorrect handling of the
product or damaged product components
Burns, cardiac arrhythmia and even fatal injuries are possible.
Do not operate the device if it has been dropped. In this case, clean and disinfect the
device and send it to ATMOS for repairs.
Prior to each use, check the device and power cable for damage. Do not operate the
device if you notice any damage. In this case, clean and disinfect the device and send
it to ATMOS for repairs.
Disconnect the device from the mains supply before cleaning or disinfecting it.
Disconnect the device from the mains power supply before cleaning, servicing,
repairing or opening it.
You can disconnect the device from the mains supply only by pulling the power plug.
Position the device so that you can always easily disconnect it from the mains power
supply.
Connect the device only to a mains power supply with a protective conductor.
Never touch the plug or power cable with wet hands.
Use the power supply unit and power cable only in a dry environment. The environ-
ment must be non-conductive.
Make sure no liquid enters the device. The device must no longer be used if liquid
gets into it. In this case, clean and disinfect the device and send it to ATMOS for
repairs.
Use power supply units and power cables only in accordance with the operating
instructions.
Use only appropriate mains connections and extension cords.
Never touch the device's interfaces and the patient at the same time!
Use only original accessories and spare parts from ATMOS. This applies in particular
to the power cable , power supply unit and battery.
Please observe the information on period tests in chapter "6 Maintenance and
service" on page 20.
Assembly, new settings, alterations, extensions and repairs may be carried out only
by authorized persons.
Do not modify the device without the manufacturer's permission.

2.3 Avoiding damage to the device

Storage and operation in an unsuitable environment.
The product may become damaged.
Please observe the ambient conditions regarding transport, storage and operation.
10 Instructions for your safety

Advertisement

Table of Contents
loading

Table of Contents