Table of Contents
Advertisement
Shelf runners
Shelf runners for accessories are fitted
on either side of the oven cavity for
shelf levels .
The shelf level numbers are marked on
the front of the oven frame.
Each level consists of 2 rails, one above
the other.
Accessories (e.g. the rack) are pushed
into the oven between the two rails.
The FlexiClip telescopic runners (if
present) are fitted on the lower rail.
The shelf runners can be removed (see
"Cleaning and care – Removing the
shelf runners with FlexiClip telescopic
runners").
Baking tray, universal tray and rack
with non-tip safety notches
Baking tray HBB 71:
Universal tray HUBB 71:
Rack HBBR 72:
Insert these accessories into the shelf
runners between the two rails of a shelf
level.
Always place the rack with the loading
surface in the lower position and the
non-tip safety notches towards the
back.
Non-tip safety notches are located on
accessories to prevent the trays being
pulled out completely when you only
wish to pull them out partially. They also
prevent trays from tipping.
– The non-tip safety notches are
located in the middle of the short
sides of the baking tray and universal
tray.
– The non-tip safety notches are
located towards the back of the short
sides of the rack.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of a shelf runner and the rack
will sit on top of it.
Features
25
Advertisement
Table of Contents
