Shelf Runners; Baking Tray, Universal Tray And Rack With Non-Tip Safety Notches - Miele H6461BP Operating And Installation Instructions

Shelf runners

Shelf runners for accessories (trays,
racks, FlexiClip telescopic runners etc.)
are fitted on either side of the oven
cavity for shelf levels ‡.
The shelf level numbers are indicated
on the front of the oven frame.
Each shelf runner has two rails:
– Accessories are inserted between
the two shelf runners.
– FlexiClip telescopic runners (if
available) are fitted to the bottom rail
of each shelf runner.
The shelf runners can be removed for
cleaning purposes (See "Cleaning and
care").
Baking tray, universal tray and rack
with non-tip safety notches
Baking tray HBB71:
Universal tray HUBB71:
Rack HBBR72:
Insert these accessories into the shelf
runners between the two rails of a shelf
level.
Non-tip safety notches are located on
accessories to prevent the trays being
pulled out completely when you only
wish to pull them out partially. They also
prevent trays from tipping.
– The non-tip safety notches are
located in the middle of the short
sides of the baking tray and universal
tray.
– The non-tip safety notches are
located towards the back of the short
sides of the rack.
Always place the rack with the
loading surface in the lower position
and the non-tip safety notches
towards the back.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of a shelf runner and the rack
will sit on top of it.
Features
27