Miele H 7860 BPX Operating And Installation Instructions page 122

Problem solving guide
Problem
12:00 appears in the
display.
Maximum operating hours
reached appears in the
display.

Fault F32 appears in
the display.

Fault F33 appears in
the display.
and a fault code
Fault
not listed here appears
in the display.
No signal to food probe.
Reposition food probe in the
appears in the
oven
display.
Function currently not
available. appears in the
display after selecting
the Descale function.
Moisture control faulty -
Automatic programmes will
operate without moisture
appears in the display
after selecting an
Automatic programme.
122
Possible cause and remedy
The power supply was interrupted for longer than 150
hours.
 Reset the time and date.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
 Confirm with OK.
The oven is now ready to use.
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact Miele.
The door lock for pyrolytic cleaning does not open.
 Switch the oven off and then back on again.
 If the door lock still does not unlock itself, contact
Miele.
A fault has occurred that you cannot resolve.
 Call Miele.
The food probe is not being recognised.
 Reposition the food probe in the food.
If the food probe is still not being recognised, it is
faulty. Call Miele.
The steam injection system is faulty.
 Call Miele.
The steam injection system is faulty.
 Call Miele.
Automatic programmes can be run without using
moisture.