Miele H 7860 BPX Operating And Installation Instructions page 120

Problem solving guide
Problem
The sensor controls or
the proximity sensor do
not respond.
120
Possible cause and remedy
You have selected the
When this is activated, the sensor controls and
proximity sensor do not respond when the oven is
switched off.
 As soon as the oven is switched on, the sensor
controls and the proximity sensor will respond. If
you want the sensor controls and the proximity
sensor to respond even when the oven is switched
off, select the
The settings for the proximity sensor are switched off.
 Change the settings for the proximity sensor by
selecting
Settings
The proximity sensor is defective.
 Call Miele.
The oven is not connected to the power supply.
 Make sure that the plug is correctly inserted in the
socket and that the socket switch has been
switched to on.
 Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
If the display does not respond, there is a fault with
the controls.
 Touch and hold the On/Off  sensor until the
display switches off and the oven restarts.
Display | QuickTouch
Display | QuickTouch
|
Proximity sensor
| Off setting.
| On setting.
.