Table of Contents
Advertisement
Cleaning and care
Evaporating residual moisture
After the third rinse residual moisture
evaporation will begin.
Remove the container and tube from
the oven.
Close the door.
Confirm with OK.
Danger of injury caused by
steam.
Steam can cause severe scalding.
Do not open the door while the
residual moisture is being
evaporated.
The oven heating will switch on and the
duration of the evaporation process will
count down in the display.
During the evaporation process, the
duration may be adjusted by the system
according to how much water is
currently present.
110
Finalising the descaling process
At the end of the evaporation process a
message will appear in the display with
advice on cleaning after running the
descaling programme.
Confirm with OK.
A buzzer sounds and
Select
.
Close
Switch the oven off with the On/Off
sensor.
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, the oven
compartment, or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before manual cleaning.
Remove the universal tray with the
collected liquid and empty it.
When the oven compartment has
cooled down, clean away any
condensation and descaling agent
residues.
Leave the oven door open until the
oven interior is completely dry.
Finished
appears.
Advertisement
Table of Contents
