Table of Contents
Advertisement
Using residual heat
– The temperature in cooking
programmes using temperatures
above 140 °C which take longer than
30 minutes to cook can be turned
down to the lowest possible
temperature about 5 minutes before
the end of cooking. The residual heat
in the oven is sufficient for cooking
the food. However, do not switch the
oven off (see "Warning and safety
instructions").
– If you have set a cooking duration for
a cooking programme, the oven
heating elements will switch off
automatically shortly before the end
of cooking. The residual heat in the
oven is sufficient to complete the
cooking process.
– It is best to start the pyrolytic
cleaning programme immediately
after a cooking programme. The
residual heat in the oven will help
reduce the amount of energy
required.
Energy saving tips
Settings
– Select the setting
QuickTouch
|
Off
elements in order to reduce energy
consumption.
– Select the
Lighting
seconds
setting for the oven interior
lighting. The oven interior lighting can
be switched on again at any time by
touching the sensor.
Energy saving mode
The oven will switch itself off
automatically to save energy if a
programme is not being run and no
controls have been operated. The time
of day will appear in the display or the
display will remain dark (see "Settings").
Display
|
for the control
|
Off
or
"On" for 15
57
Advertisement
Table of Contents
