Table of Contents
Advertisement
Editing a combination (Combination mode)
You can assign RADIAS programs to the timbres of a
combination, and create combinations that use them
together with the EDS programs. Up to four RADIAS
programs can be used in one combination. The maximum
polyphony of all RADIAS programs will be 24 voices.
Timbre settings
Here we'll explain how to select bank INT–F programs so
they can be played.
1. Select the combination that you want to edit.
2. Access the COMBI P2–5: RADIAS T01–08 or P2–6:
RADIAS T09–16 page.
3. In "Program Select," turn "Enable RADIAS" on
(checked) for the timbres in which you want to use a
RADIAS program. When you play the keyboard, you'll
hear the RADIAS program.
Note: You can turn up to four Enable RADIAS settings on.
Timbres for which this is off (unchecked) will not sound.
4. Access the COMBI P0–1: Program T01–08 or P0–2:
Program T09–16 page.
An indication of "
" is shown above the category for
timbres whose Enable RADIAS" On (checked).
5. Use "Program Select" to select a bank INT–F program.
6. Edit the parameters of each timbre, adjust arpeggiator
settings, and adjust the parameter settings for routing,
insert effects, master effects, and total effects.
However, the following parameters will operate in a
different way than when you're using an EDS program.
Refer to the parameter guide.
• COMBI P3–3(4)c: Force OSC Mode, OSC Select,
Portamento (☞p.54)
Editing a combination (Combination mode) Timbre settings
• COMBI P3–5(6)c: Pitch Transpose, Detune (Use BPM
Adjust in Menu) (☞p.54)
• COMBI P3–7(8)c: Type (Combi's Scale) (☞p.55)
• The Keyboard Zones/Velocity Zones "Top Slope" and
"Bottom Slope" settings will have no effect. (COMBI P4:
Zone/Delay)
15
Advertisement
Table of Contents
