Sts Name Panel; Mic Panel - Korg PA800 User Manual

Track status icons
Play/mute status of the current track. Select the track, then press
the track area again to change its status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Track names
Under the sliders, a label for each track is shown. Use the
TRACK SELECT button to switch between the various track
views.
Track Description
Normal View
(a) Grouped Drum and Percussion tracks.
DR/PERC
(*)
ACCOMP Grouped Accompaniment tracks.
(*) Bass Style track.
BASS
Microphone (Voice Processor). Sources
(*)
MIC/IN
connected to the Audio Inputs, and
directly sent to the outputs, are not con-
trolled by this slider.
LOWER Lower track.
UPPER1...3 Upper tracks.
Style Tracks View
DRUM Drum Style track.
PERC Percussion Style track.
BASS Bass Style track.
ACC1...5 Accompaniment Style tracks.
(a).Volume for these tracks is a global offset and is not memorized.

STS Name panel

Press the STS Name tab to select this panel. Single Touch Set-
tings (STS) are memory locations for quickly choosing Keyboard
Sounds, contained in each Style or SongBook entry. While in
this panel, you can see the name of the four STSs belonging to
the latest selected Style or SongBook entry. Touch one of the
names to select the corresponding STS.
Note: You cannot edit STS names with this panel. To edit a name,
select the STS to be renamed, then select the Write Single Touch
Setting command from the page menu (see "Write Single Touch
Setting dialog box" on page 104).
Style Play operating mode
Sty

Mic panel

Press the Mic tab to select this panel. This is where you can set
the various Voice Processor options.
Mic On/Off
Voice Processor Preset
Mic On/Off
Use this switch to mute/unmute the microphone. This is the
same as the MIC/IN Play/Mute icon in the Main page (see
"Track status icons" on page 87).
Note: Any line signal entering the Audio Inputs, and not being sent
to the Voice Processor, is not affected.
Harmony On/Off
Turns the Harmony module on/off.
Talk On/Off
Use this switch to soften all music generated by the Pa800, and
speak in the microphone at normal level. This is useful to
address your audience, while automatically lowering the back-
ground music volume.
While this switch is turned on, all Voice Processor
modules are momentarily turned off, except for
Reverb, whose level is simply reduced to avoid los-
ing clarity on the voice. Setting for the Talk func-
tion can be programmed on the Talk page (see
"Voice Processor Setup: Talk" on page 213).
Depress this switch to return to the original set-
tings.
Note: When you deactivate the Talk function, the Voice Processor
Preset is recalled. Any unsaved change to the Preset will be lost.
VP Preset
Use this pop-up menu to select one of the available Voice Proces-
sor Presets. Selecting a Preset may change all the above parame-
ters, as well as other Voice Processor parameters. Presets can be
freely edited (see "Voice Processor Preset: Preset" on page 214).
VP lock icon
This lock avoids changing the Voice Processor Preset when
selecting a different Performance, STS or SongBook entry. This
is useful if you want to use the same Preset while selecting differ-
ent Performances, STSs or SongBook entries.
This lock is reset when turning the instrument off, unless you
write Global settings to memory (see "Write Global - Global
Setup dialog box" on page 210).
STS Name panel
Harmony On/Off
Talk On/Off
87
VPp
Tlk
Gbl