Pim And Transceiver Modules - Cisco vEdge Series Hardware Installation Manual

vEdge 2000 Router

PIM and Transceiver Modules

This article describes the Pluggable Interface Modules (PIMs) for the vEdge 2000 router as well as the SFP
and SFP+ transceivers for those PIMs.
PIMs for the vEdge 2000 Router
The vEdge 2000 router offers interface modularity, providing two PIM slots that support two types of PIMs:
• 8x1-Gigabit Ethernet SFP PIM (Model: PIM-8x1GE-SFP)
• 2x10-Gigabit Ethernet SFP+ PIM (Model: PIM-2x10GE-SFP+)
The two PIM slots are labeled PIM Slot 0 and PIM Slot 1.
Figure 1 and Figure 2 show the front panel of the 8x1-Gigabit Ethernet SFP PIM and the 2x10-Gigabit Ethernet
SFP+ PIM, respectively.
Figure 1: Front Panel of 8x1-Gigabit Ethernet SFP PIM
Figure 2: Front Panel of 2x10-Gigabit Ethernet SFP+ PIM
PIM and Transceiver Modules
Hardware Installation Guide for vEdge Routers
165