Components And Specifications - Cisco vEdge Series Hardware Installation Manual

vEdge 100wm Router
The Viptela software distribution policy allows only authenticated users to download the Viptela encryption
software. Recipients of controlled technology are obliged to maintain adequate controls to prevent nationals
from outside the U.S. and Canada from accessing Viptela information, subject to ECCN5E002, without first
obtaining authorization from the U.S. government.
For additional information on controlled technologies, please contact Viptela support at support@viptela.com
.

Components and Specifications

This article provides specifications for the vEdge 100wm chassis, wireless platforms,
and multiband swivel-mount dipole antennas.
Chassis Specifications
Table 1 lists the specifications for the vEdge 100wm router chassis.
Table 23:
Item
Services and Slot Density
RJ45 Ports 10/100/1000 Mbps
Embedded hardware-based cryptographic acceleration
(IPSec)
Memory DDR3 ECC DRAM
NAND storage (internal)
USB host port
Mini USB connector console port (default baud rate
115.2 Kbps)
Power supply
Power Specifications
AC input voltage
AC input line frequency
Typical power consumption with PoE disabled on
interface ge0/0
Typical power consumption with PoE enabled on
interface ge0/0
Physical Specifications (excluding the
multiband antennas)
Components and Specifications
Specification
5 ports, one of which has 802.3af PoE source
capability
Yes
2 GB
4 GB
1
1
AC input (C6 inlet connector)
90-264 Vrms
47-63 Hz
20 Watts
35 Watts maximum
Hardware Installation Guide for vEdge Routers
85