Front And Rear Panel Components - Cisco vEdge Series Hardware Installation Manual

vEdge 100wm Router
Item
Antenna
dimensions
Humidity
Wi-Fi Specifications
The vEdge 100wm router provides the following Wi-FI capabilities:
• Embedded Wi-Fi radio for access point functionality
• Wi-Fi radio configurable for 2.4-GHz or 5.0-GHz operation
• Supports IEEE 802.11a, 802.11b, 802.11g, 802.11 n, and 802.11ac protocols
• Supports channel bandwidth of 20 MHz, 40 MHz, and 80 MHz
• Supports IEEE 802.11h DFS channels
• 3x3 MIMO with three spatial streams
• Supports up to four different SSIDs
• Supports up to 50 concurrent clients
• Supports wireless security and authentication:
• Internal embedded antennas

Front and Rear Panel Components

This article describes the components on the front and rear panels of the vEdge 100wm router. For the exact
location of these components on the router, see At a Glance .
Front Panel LEDs
The vEdge 100wm router has five chassis status LEDs located on the front panel. Table 1 describes the LEDs,
their color and states, and the status they indicate.
Specification
Length: 6.37 in. (16.19 cm)
Width: 0.9 in. (2.38 cm)
Depth: 0.63 in. (1.59 cm)
Noncondensing, 65°C, 95% RH
• Personal and enterprise WPA/WPA2
• AES/CCMP encryption
• TKIP encryption
Front and Rear Panel Components
Hardware Installation Guide for vEdge Routers
89