Cisco vEdge Series Hardware Installation Manual page 147

vEdge 1000 Router
1. Verify the internal dimensions of the rack with a tape measure. The rack-mount tray is 440 mm wide and
must fit within the mounting posts.
2. Have one person grasp both sides of the rack-mount tray on which you secured the vEdge router(s) and
position it in the rack.
Figure 11: Holding the Rack-Mount Tray with the vEdge Router(s) in Place
1. Have a second person secure the rack-mount tray to the two front posts of the rack using four rack-mount
screws provided in the rack-mount kit. See Figure 12.
Figure 12: Screwing the Rack-Mount Tray to the Two Front Posts of the Rack
Install the vEdge 1000 Router
Hardware Installation Guide for vEdge Routers
141