Components And Specifications - Cisco vEdge Series Hardware Installation Manual

vEdge 2000 Router
Controlled Technologies
Viptela manages technology subject to the U.S. Export Administration Regulations (EAR). These controlled
technologies may include items under U.S. ECCN 5E002 encryption technology. The Viptela encryption
technology is for the development, production, and use of Viptela products that implement or use encryption.
The Viptela software distribution policy allows only authenticated users to download the Viptela encryption
software. Recipients of controlled technology are obliged to maintain adequate controls to prevent nationals
from outside the U.S. and Canada from accessing Viptela information, subject to ECCN5E002, without first
obtaining authorization from the U.S. government.
For additional information on controlled technologies, please contact Viptela support at support@viptela.com
.

Components and Specifications

This article provides the chassis specifications of the vEdge 2000 router and lists the other router components.
Chassis Specifications
Table 1 lists the specifications for the vEdge 2000 router chassis.
Table 1: vEdge 2000 Router Chassis Specifications
Table 50:
Item
Services and Slot Density
Fixed SFP-based traffic ports (max 1 Gbps)
Pluggable Interface Module (PIM) slots
Embedded hardware-based crypto acceleration (IPSec)
Memory DDR3 ECC DRAM
SD card slot (external)
NAND storage (internal)
External USB flash memory slots (Type A USB 3.0)
USB console port (Type B default 115.2 Kbps)
Serial console port (RJ-45 default 115.2 Kbps)
Management Ethernet port (RJ-45 10/100/1000 Mbps)
Power supply option
Redundant power supply support
Power Specifications
Components and Specifications
Specification
4
2
Yes
8 GB
Maximum capacity supported 32 GB
8 GB
2
1
1
1
Hot-swappable Power Supply Units (PSUs)
Active–Active redundancy
Hardware Installation Guide for vEdge Routers
161