Ports And Connectors - Cisco vEdge Series Hardware Installation Manual

Ports and Connectors

Manufacturer & Part
Number
Finisar
FTLX1471D3BCL
Ports and Connectors
The vEdge 1000 router supports three types of ports: network ports (also called SFP ports), management port,
and console port.
Network Ports (SFP Ports)
The built-in Gigabit Ethernet network ports on the vEdge 1000 router support 1-Gbps SFP transceiver modules.
Table 1 provides the pinout information for the built-in SFP port connector. The SFP ports comply with the
SFP MSA standards.
Table 37:
P i n Signal
1 VeeT
2 TX_Fault
3 TX_Disable
4 SDA
5 SCL
6 MOD_ABS
7 RS0
8 RX_LOS
9 RS1
1 0 VeeR
1 1 VeeR
1 2 RD-
1 3 RD+
Hardware Installation Guide for vEdge Routers
120
Viptela Part vEdge
Number 1000
Router
SFP+-10GE-LR
Description
Module transmitter ground
Module transmitter fault
Transmitter disable
Two-wire serial interface data line
Two-wire serial interface clock
Module absent
Rate select 0; optionally controls SFP module receiver
Receiver loss of signal indication
Rate select 1; optionally controls SFP transmitter
Module receiver ground
Module receiver ground
Receiver inverted data output
Receiver non-inverted data output
vEdge vEdge5000 Description
2000 Router
Router
X X • SFP+ transceiver
• LC-type connector
• Long-reach 1310-nm optics for
single-mode fiber up to 10 km for
10-Gbps applications
vEdge 1000 Router