Table of Contents
Advertisement
Connect Router to the Network
Figure 63: Removing a Bale Clasp SFP or SFP+ Module
Step 5
Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if you
plan to return it to the factory.
Step 6
Protect your line card by inserting a clean SFP module cage covers into the optical module cage when there
is no SFP module installed.
Install and Remove QSFP Transceiver Modules
This section provides the installation, cabling, and removal instructions for the Quad Small Form-Factor
Pluggable transceiver modules. Refer to the
on optical transceivers.
The following figure shows a 400-Gigabit QSFP-DD optical transceiver.
Install and Remove QSFP Transceiver Modules
Cisco Optical Transceiver Handling Guide
Hardware Installation Guide for Cisco 8600 Series Routers
for additional details
75
Advertisement
Table of Contents
