Cisco vEdge Series Hardware Installation Manual page 202

vEdge 2000 Router
Connect the vEdge 2000 Router
2. Connect the other end of the console cable into the console server or to a management console.
Figure 3: Connecting a vEdge 2000 Router to a Management Console
To use the USB console from a Windows device:
1. Go to the Device Manager to determine which COM port is being used for the USB serial port.
2. In the PuTTY SSH/Telnet client, in Connection Type, select Serial. Then, specify the COM port and a
speed of 115200.
Hardware Installation Guide for vEdge Routers
196