General Settings; Device Information; Local - Dahua PFS4218-16GT-190 Web Config Manual

3.1

Device Information

You can view the Name, Device Type, Serial Number, and Software Version of the device. And
you can view the port status and port information.
Select General > Device Information, and you can view the System Information and Port
State Overview. See Figure 3-1. In Port Status Overview, if the port is displayed as green, it is
connected successfully. And if the port is displayed as white, it is not connected. See Table 3-1
for details about port information.
Parameter
Port
Port Type
Link
Speed/Duplex
VLAN
PoE
Media Type
3.2

Local

You can set the system name, IP address, and address mask length.
Select General > Local, and the Local interface is displayed. See Figure 3-2.
3
Figure 3-1 Device information
Table 3-1 Port information
Description
Display all the ports.
This switch contains 16/24 ports. Port quantity might vary depending
on the model you purchased, and the actual product shall govern.
Three types: Access, Hybrid, and Trunk.
Two link states: Up, Down. Up indicated the port is connected
successfully, and Down indicates the port is not connected.
Display the port rate and the duplex mode.
Display the port VLAN. By default, it is VLAN 1.
Display the PoE power of the port.
Two media types: Copper, Fiber. Copper is the RJ-45 port, and Fiber
is the fiber port.

General Settings

General Settings 3