Units Required For Draining The Ink; Outer Covers - Canon W6400 Series Service Manual

Chapter 4

4.3.3 Units required for draining the ink

When disassembling the following units of the ink passage, drain the filled ink to prevent an ink leak. To drain the ink, refer to DISASSEMBLY/
REASSEMBLY > Points to Note on Disassembly and Reassembly > Draining the Ink.
- Head holder
Refer to page DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Carriade unit.
- Carriage unit
Refer to page DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Carriade unit.
- Ink tube unit
Refer to page DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Ink tube unit.
- Ink tank unit
Refer to page DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Ink tank unit.

4.3.4 Outer covers

a) Upper cover
When removing the upper cover, fully open the upper cover, release the cover arm (1), pull out the patch material 1 (2) and patch material 2 (3), and then
push the upper cover toward the left.
4-4
Carriage unit
(Include head holder)
Ink tank unit
F-4-5
Upper cover
4
1
F-4-6
Ink tube unit
2
3
0009-8784
0009-8785