4.3.2 Manual carriage movement
Move the carriage as necessary to keep it from coming into contact with any parts that may be removed during disassembly/reassembly.
The carriage is not movable while it is capped.
In this case, uncap the printer before moving it.
See:
See Disassembly/Reassembly > Tips on Disassembly/Reassembly > Ink Drain > Open Cap/Shift Wiper Unit.
4.3.3 Units required for draining the ink
Before disassembling the units in the ink passage mentioned below, drain them of inks completely to prevent their leakage.
For instructions on how to drain units of inks, see Disassembly/Reassembly > Tips on Disassembly/Reassembly > Ink Drainage.
[1]Ink Tube Unit
See Disassembly/Reassembly > Tips on Disassembly/Reassembly > Ink Tube Unit.
[2]Carriage Unit/Head Holder
See Disassembly/Reassembly > Tips on Disassembly/Reassembly > Carriage unit.
[3]Ink Tank Unit
See Disassembly/Reassembly > Tips on Disassembly/Reassembly > Ink Tank Unit.
[1]
[2]
[3]
F-4-4
Chapter 4
0012-6357
0012-6359
4-3